Label remover machine is a kind of machinery that cannot be missing in plastic bottle recycling line. The main function of the PET bottle label remover machine is to remove the label paper from the plastic bottles. But non-professionals may encounter many difficulties in the operation of machinery and troubleshooting. Today, Shuliy Group shares some common failures and solutions as well as the maintenance methods of the label remover.
Common failures of label remover machine
- The plastic label remover machine cannot start
Solution: Check whether the power supply is normal. Check whether the safety switch at the bottom of the barrel is closed. Check whether the screw is jammed by foreign objects - There is an abnormal sound in the operation of the label removing machine after starting
Solution: Check whether the belt at the top of the barrel is too loose and whether there is any problem with the bearing of the motor and the screw and bearing
Daily maintenance of label remover machine
- The bearing of the PET bottle label remover machine bears the entire load of the machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine, so it is best to inject lubricant once every half month.
- 活动装置底架平面放置时，应清除灰尘等物，以免活动轴承无法在底架上移动时机器无法粉碎物料，造成严重事故。
- 轴承油温升高应立即停车检查原因并消除。转动齿轮运转时若有撞击声，应立即停车检查。
- 新安装的轮箍容易松动，必须经常检查。
- 注意机器部件的正常工作，检查易损件的磨损情况，经常注意磨损的更换
- 保持风扇的人体进风口不能被异物堵塞。如果风扇的进风口被异物堵塞，可能会烧坏热管。并尽量让进风口的空气不带有灰尘。
Operation standard of label remover machine
- 一次进入的物料过多容易造成卡料，从而对机器造成损害。建议不要这样做。
- 设备运行时，严禁将手放入脱钙机内进行操作，以免造成伤害。
- 严禁将硬物等物品放入脱钙机内，这会造成刀片损坏。
- 设备内严禁放置水瓶、剪刀、刀片等杂物，防止异物落入进料口损坏设备。
- 定期对各运转部件进行润滑保养，从而有利于延长机器的使用寿命。