PET crusher is one of the important pieces of equipment in plastic processing. However, in the process of use, the plastic grinder machine may appear to splash problems, bringing trouble to production. In this article, we will analyze the causes of plastic waste grinder splash and provide corresponding solutions from three aspects: the softness and hardness of the plastic, the crusher’s baffle plate, and the adjustment of the rotational speed.
Raw material for PET crusher
When a PET crusher is in operation, the softness or hardness of the plastic is an important factor in determining the splash situation. Usually, the plastic waste grinder is easy to produce splash when dealing with hard plastics. This is because, during the crushing process, hard plastics are more likely to bounce back, causing pieces to fly around. In contrast, soft plastics are less prone to splashing. Therefore, operators should be extra vigilant and take appropriate safety measures when handling hard plastics in the plastic grinder machine.
Plastic grinder machine baffles
To minimize splash situations, PET crushers are often fitted with baffles. The installation of baffles can effectively control the dispersion of debris and direct it to a designated area, reducing the risk of injury to operators and equipment. Therefore, when using a plastic waste grinder, it is important to check and ensure that the baffles are securely mounted and that the position of the baffles is adjusted at the right time to achieve optimum protection.
Rotation speed of PET crusher
Adjusting the rotational speed of the PET crusher is also an important strategy for controlling splash conditions. Excessive rotational speed will cause the fragments to generate too much kinetic energy, making them more prone to splashing. Therefore, a reasonable adjustment of the rotational speed can effectively reduce the possibility of splashing. When making plastic grinder machine rotational speed adjustments, a suitable balance needs to be found based on different plastic types and hardnesses, and baffle settings.
Measures to solve PET crusher splash
Firstly, check and maintain the PET crusher regularly to ensure the integrity of key components such as baffles and blades. Secondly, according to the characteristics of different plastic materials, reasonably adjust the speed of the plastic waste grinder and the position of the baffle to minimize the risk of splashing. Finally, the operator must wear the necessary safety protection equipment to avoid injury from splashing debris.