Label Remover Machine Common Fault Analysis

Label remover machine is a kind of machinery that cannot be missing in plastic bottle recycling line. The main function of the PET bottle label remover machine is to remove the label paper from the plastic bottles. But non-professionals may encounter many difficulties in the operation of machinery and troubleshooting. Today, Shuliy Group shares some common failures and solutions as well as the maintenance methods of the label remover.

Common failures of label remover machine

1. The plastic label remover machine cannot start
   Solution: Check whether the power supply is normal. Check whether the safety switch at the bottom of the barrel is closed. Check whether the screw is jammed by foreign objects
2. There is an abnormal sound in the operation of the label removing machine after starting
   Solution: Check whether the belt at the top of the barrel is too loose and whether there is any problem with the bearing of the motor and the screw and bearing

Daily maintenance of label remover machine

1. The bearing of the PET bottle label remover machine bears the entire load of the machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine, so it is best to inject lubricant once every half month.
2. put the activity device’s bottom frame plane, should go out dust and other things to avoid the machine can not crush the material when the activity bearing can not move on the bottom frame, so serious accidents.
3. bearing oil temperature rise should immediately stop to check the cause to eliminate. If there is an impact sound when the rotating gear is running, it should be stopped immediately for inspection.
4. The newly installed wheel hoop is prone to loosening and must be checked frequently.
5. Pay attention to the normal work of the machine parts, check the wear and tear of easy-to-wear parts, and always pay attention to the replacement of worn out
6. Keep the fan’s human air inlet can not be blocked by foreign objects. If the air inlet of the fan is blocked by foreign objects, it will possibly burn the heat pipe. And try to let the air into the wind at the air inlet does not have dust.

Operation standard of label remover machine

• The material is too much at once into the easy to causes jamming, which will cause harm to the machine. It is recommended not to do so.
• When the equipment is running, it is strictly forbidden to put hands into the decalcifying machine for operation, so as not to cause injury.
• It is strictly prohibited to put hard objects and other things into the decalcifying machine, which will cause damage to the blade.
• Equipment is strictly prohibited to place water bottles, scissors, blades, and other debris to prevent foreign objects fall into the feed port damaged equipment.
• To maintain regular lubrication maintenance of the operating parts, so as to help extend the life of the machine.