Waste plastic granulator cleaning will bring trouble if not operated properly. How to clean the plastic pelletizer machine economically and efficiently, but also make it not damaged? This article describes how to clean the plastic granulation equipment properly. You can refer to it.
Setting right waste plastic granulator cleaning temperature
Before cleaning the plastic granulation equipment, the first step is to set the proper cleaning temperature. Generally speaking, we should set the temperature of the plastic pelletizer machine within a safe range to avoid accidents during the cleaning process. The heater should be turned off when cleaning the waste plastic granulator plastic granulation equipment and patiently wait for the temperature of the screw and barrel to drop below 50°C.
Selecting right plastic pelletizer machine cleaner
The choice of cleaner is crucial for the cleaning of plastic pelletizer machines. It is recommended to use professional plastic equipment cleaners. Specialized cleaners have a very good ability to remove dirt, while not causing corrosion on the waste plastic granulator. Avoid using chemical cleaners that contain acid and alkali components. Because chemical cleaners will damage the surface of the plastic granulation equipment and affect the output quality of plastic pellets.
Waste plastic granulator cleaning tools
When cleaning the waste plastic granulator, it is equally important to choose the right cleaning tools. Never use metal-based cleaning tools as they may scratch the surface of the plastic pelletizer machine. Instead, choose soft brushes and professional cleaning cotton cloths to ensure a gentle but thorough cleaning of the plastic granulation equipment.
Plastic granulation equipment cleaning steps
- Remove residue: First, the cleaner needs to thoroughly remove the residue inside the waste plastic granulator, including the screw, barrel, and feed opening.
- Spraying cleaner: During the cleaning process, spray the appropriate amount of cleaner inside the plastic granulation equipment, so that the cleaner can fully penetrate and decompose the dirt.
- Mechanical cleaning: Use soft brushes and a clean cotton cloth for cleaning. Take care to thoroughly remove the dirt adhering to the surface of the plastic pelletizer machine.
- Rinse and Wipe: Finally, rinse the waste plastic granulator well with water and wipe it with a clean cotton cloth. Make sure that no residue of cleaner or dirt is left behind after the cleaning job.
Regular cleaning of plastic pelletizer machines can effectively remove dirt and residues, maintain equipment performance and extend equipment life. For more information about plastic granulators, please visit our official website https://shuliypre.com/