Plastic scrap crusher machine discharge port should take into account the particle size, discharge speed, discharge angle, and other factors. Choose the right discharge to facilitate the polystyrene shredding machine’s discharge.
Particle size
The design of the outlet of a plastic scrap crusher machine needs to take into account the size of the plastic pellets being processed. Smaller particles are prone to clogging and jamming, and certain strategies need to be adopted to avoid this situation.
A common solution is to set up a motor speed slowdown near the outlet of the polystyrene shredding machines. By slowing down the speed of the plastic granules, it avoids too much impact causing difficulties in discharging the material.
Discharge speed
The discharging speed of the plastic scrap crusher machine determines the design scheme of its discharge port. If the discharging speed is too fast, you need to consider how to reduce the speed to avoid material splashing and clogging phenomenon.
A feasible solution is to use pneumatic valves to control the discharge volume and speed so that the polystyrene shredding machines discharge more smoothly and controllably.
Discharge angle
The angle of the plastic scrap crusher machine outlet is also one of the factors to consider. Different discharging methods can be adjusted to the discharging angle to adapt to the needs of different particles discharged.
A more practical way of discharging is to use the rotary discharge port. Through the adjustment of the rotating angle to control the direction and angle of the polystyrene shredding machine outlet, to achieve fast and accurate discharging.
